This is the 1/10 scale electric powered Calsonic Impulz
                     ready to run on-road car from Tamiya.

FEATURES: Chassis: Plastic tub TT-01 design Drive: Four wheel shaft drive Radio: 2-channel 27MHz pistol grip with receiver and one standard size servo with servo reverse and steering and throttle trim Electronic Speed Control: With Kyosho style battery connector and reverse which can be changed to braking function at races where reverse is not allowed Motor: 540 motor with pre-attached leads Full Ball Bearings Shocks: Plastic body, oil filled Gearbox: Enclosed, front and rear Differentials: Bevel gear Transmission: Single speed Tires: 2.6" (65mm) outer diameter, racing radial type Wheels: Five spoke, 2" (51mm) outer diameter, white Bumpers: Foam front bumper Suspension: Double wishbone, fixed non-adjustable Camber Tie Rods: Fixed, non-adjustable, 3 part (Camber refers to the angle at which the tires sit vertically) Steering Tie Rods: Fixed, non-adjustable (Caster/Toe-in refers to the angle at which the tires point inward as viewed from above) Steering: Bell-crank type Servo Saver: Included

INCLUDES: Calsonic Impulz assembled chassis w/friction type shocks, 2-channel pistol-grip transmitter & receiver, 540 motor, ESC, painted body, tires, foam bumper, spoke wheels, 19 tooth pinion gear, 61 tooth spur gear and instructions. _ REQUIRES: Radio Batteries: 8 AA size (for transmitter) Battery: 6 flat pack with standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment

SPECS: VEHICLE- Length: 16.7" (423mm) Width: 7.3" (185mm) Height: 5.2" (132mm) Weight: 2.2lbs (990g) kit only 3.3lbs (1490g) with battery, speed control, motor and radio equipment Wheelbase: 10.1" (257mm) Tread: Front- 6.3" (159mm) Rear- 6.2" (157mm) side-to-side at wheel centers Gear Ratio: 8.35:1 Tires, F&R: Overall Diameter, 2.6" (65mm) Overall Width, 1" (26mm) Inner Bead Diameter, 1.9" (48mm) BODY- Length: 17.5" (444mm) Width: 8" (204mm) at rear wheels 7.25" (184mm) at front wheels Height: 4.25" (108mm)

COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 12 5 x11mm front & rear diff gears, hubs (use 6 DTXC1547) 4 8 X12mm front & rear diff gears (use 2 DTXC1597)

Body is painted blue with all body trim and sponsor decals applied

jxs 1/21/05 ir/jxs