This is the Magnum 3PK 3-Channel Titanium Black
             Pistol-Grip Synthesized Radio on 75MHz from Futaba.

This is a transmitter and module only, no receiver or servos are included.

Seven Color LED Monitor, Brake mixing for 1/5 Scale cars, Futuristic Look, New Large Backlit Display, and Adjustable Steering Wheel position, NEW generation of modulation called HRS all make this radio unique.

FEATURES: PROGRAMMING FUNCTIONS: 10 model memory (8 more with optional CAMPac), model copy and reset 10 digit model and user naming: English or Japanese characters HRS (High Response System) is modulation that provides input to receiver three times faster than PPM (FM) data transmission. Must use ONLY 6V battery packs and all digital servos with HRS. PCM/PPM/HRS Selectable with 3-ch adjustable FailSafe for PCM/HRS 3 Function selection modes (New User, Race Ready Driver and Expert provide 1/2/3 menus of features for just the right fit!) PLUS the direct selection 2-key menu to up to 6 functions. Steering Dual Rate and Dual Rate 2, both adjustable while driving Servo display shows all 3 servo positions for easy setup/diagnostic Anti-Skid Brake System (ABS) Keeps tires from skidding, or locking-up, even on nitro cars (with 5 adjustments) Throttle Acceleration decreases lag time before clutch or brakes are engaged Steering and throttle exponential, 3 forward expo types End point adjustments for all 3 channels (EPA/ATV) Steering and throttle servo speed limiters Brake mixing for 1/5 scale cars with separate front and rear brakes System adjustments for back lighting, pilot lamp color, home display Servo reversing Idle-up for easy starts and engine cut for boat engine shut off Start (Preset throttle start control. Limits throttle at the beginning of a race to give smoother acceleration and less wheel slip.) similar to traction control on 3PJS Advanced timer w/100 lap recall & trigger activation Trim/dial function selection can assign different functions to the different trim controls and dials Switch function selections can assign different functions to the different switches Subtrim adjustments Step trim adjustments allows changing of trims in finer increments Programmable mixing Tilt mixing for adjusting the trim tabs with the 3rd channel on boats Third channel assignable to any dial/switch/trimmer/mix MC-SETUP function for HRS receivers to properly setup ESCs ADJUSTER function to manually calibrate trigger and wheel

EQUIPMENT FEATURES: Optional DSC cord support for operating receivers without transmitting (cord not included), order FUTM4245 LARGE REAR facing LCD plus seven color pilot lamp for easy ID. One year limited warranty Digital trim with reset Left Hand reversible Adjustable Positioning Adapter drops wheel in seconds to achieve desired balance and feel Steering wheel tension adjust can be adjusted without opening radio Trigger stop function (mechanical ATL) and programmable ATL Display switch allows functions to be set without transmitting Audible, adjustable alarm tone and lap counting tones Headphone jack for hearing the alarm tones at a noisy track

INCLUDES: One 3PK Transmitter No Number One Synth Transmitter Module FUTL8905 One Transmitter Antenna One NT8F700B Transmitter NiCd Battery FUTM1462 One Battery Charger FUTM1830 One Adjustable Positioning Adapter One Instruction Manual

OPTIONAL: Campac 16K, 8 Model Memory (FUTM9405) MC SETUP cord: FUTM4245, this special cord allows the receiver to communicate with an ESC temporarily at a slower frame rate so the ESC can be set up properly when using the HRS receivers. Metal Carrying Case (FUTP1010)

REQUIRES: **DIGITAL SERVOS ONLY WHEN USED W/HRS RECEIVERS** R203HF Receiver HRS 75MHz, FUTL0344 Receiver NiCd battery of modeler's choice

SPECS: Operating System: FM/PPM, HRS_FM or PCM1024 switchable Transmitting Frequency: 75Mhz Power Supply: 9.6V NiCd Current Drain: 250 mA or less

COMMENTS: Can also use regular PPM (FM) and PCM1024 receivers. To use the DSC function you will need to use a Y-harness (HCAM2500).

jxs 10/25/04 ir/jxs